What should I do if the Controller displays an 'E1' error?Updated 7 days ago
1How to fix an "E1" error on your face mask controller2Applies to: Illumina LED Face Mask, Illumina Neck & Chest Mask, Laser Face Mask Pro34What E1 means:5An E1 error usually means the controller can't make a clean connection with the mask. In most cases the cause is a loose cable or dirt on the magnetic connector, not a broken device. Most E1 errors go away after the steps below.67How to fix it:81. Turn the device off.92. Charge the controller to at least 50%. (Skip this step if your controller plugs into the wall.)103. Unplug the power cable from the mask.114. Look at the magnetic connector on the cable and the port on the mask. Check for dirt, grease, lint, or small metal pieces. The magnet can pick up things like hairpins or metal filings.125. If you find anything, remove it. Then wipe both connectors gently with a dry, lint-free cloth.136. Plug the cable back into the mask. Make sure it clicks into place and sits flat.147. Make sure the cable is also seated firmly in the controller.158. Turn the device on.1617Laser Face Mask Pro owners: only use the controller that came with your Pro. Controllers from other iRESTORE masks won't work with it and can cause an E1 error.1819Still seeing E1?20Contact our support team. Have these ready:21- Your order number22- The serial number (it's on the back of the controller)23- A short video or photo of the error on the controller2425We'll help you get it sorted out quickly, including a replacement part if you need one.